TRENDnet TPL-430AP -Wireless security

We recommend that you use the default WPA2 setting as it’s the most secure way of protecting your network. You should only change this setting if you have devices that don’t support WPA2.

Security type:

WEP

If you choose the WEP security option this device will ONLY operate in Legacy Wireless mode (802.11b/g) for networks/SSIDs on the 2.4GHz band.

WEP is the wireless encryption standard. To use it you must enter the same key(s) into the router and the wireless stations. For 64 bit keys you must enter 10 hex digits into each key box. For 128 bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F.

You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64 bit keys, and a maximum of 13 characters for 128 bit keys.

WEP Key Length :

Default Tx Key :

WEP Key Format :

WEP Key :

WEP Key2 :

WEP Key3 :

WEP Key4 :

Authentication :

WPA2

WPA (WiFi Protected Access) is the next generation of security for wireless networks and offers improved security over WEP. Your Wi-Fi Home Hotspot is set to WPA & WPA2 by default.

Select WPA & WPA2 if all your wireless devices support WPA (check the instructions supplied with your wireless devices).

WPA Mode :

WPA2-Personal

Encryption Mode :

TKIP AES Both

Group Key Update Interval :

(60 - 65535)

Pre-Shared Key

Wireless network password/key:

The pre-shared key should be 8 to 63 ASCII, or 64 hexadecimal numbers.

EAP (802.1x)

When WPA enterprise is enabled, the router uses EAP (802.1x) to authenticate clients via a remote RADIUS server.

RADIUS server IP Address :

RADIUS server Port :

RADIUS server Shared Secret :